Módulo I/O 8 AI de Alta Velocidade PET-7H16M
O módulo I/O Ethernet com 8 AI de Alta Velocidade PET-7H16M foi projetado para o monitoramento de condição de máquinas para sistemas de manutenção preditiva ou detecção de anomalias com taxa de amostragem de até 200ks/s. Pode ser utilizado em conjunto como o condicionador de sinais IEPE SG-3227 para conectar sensores de vibração ou acelerômetros.
| External Clock/Digital Trigger | |
| Counter | 32 bits Max. Count, 30 kHz Max. Input Frequency |
| Trigger Type | Falling edge |
| Trigger Pulse Width | 1.5 µs Min. |
| ON Voltage Level | +5 ~ 5.5 VDC @ 15 mA |
| OFF Voltage Level | < 0.8 VDC |
| Analog Input | |
| Channels | 8 Single-ended (Simultaneously) |
| Range | Bipolar Input (Programmable): ± 10 V, ± 5 V |
| Resolution | 16-bit |
| Accuracy | 0.05 % of FSR |
| Sampling Rate | 200 kS/s (Each channel) |
| FIFO Size | 2 k samples |
| Trigger Mode | Programmable: Software/External clock trigger/Digital trigger (Post-trigger/Pre-trigger/Delay-trigger), Analog Input trigger |
| Synchronous Input | Yes |
| Digital Input | |
| Channels | 4 |
| Sink/Source (NPN/PNP) | Sink/Source |
| Wet Contact, ON Voltage Level | +5 ~ +30 VDC |
| Wet Contact, OFF Voltage Level | 1 VDC Max. |
| Isolation | 2500 VDC |
| Digital Output | |
| Channels | 4 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 ~ 30 VDC |
| Max. Load Current | 100 mA |
| Overload Protection | 1.3 A |
| Isolation | 2500 VDC |
| Short-Circuit Protection | Yes |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X) |
| PoE | Yes |
| Security | ID, Password and IP Filter |





